|
RICHARD BLACK 1993 CLASSIC
|
This is a classic, older Richard Black creation, made in 1993. There are several things unique about it. First, it is not a standard length cue - it's 59 inches long. Second, it has four shafts. I'm sure at least two of them are original Black shafts, and they may all be, but I'm not sure. Finally, one of the shafts has reverse ebony points coming down into the shaft from the tip. Told you it was unique!
|
The forearm looks very similar to the Richard Black classic, the "Black Baron." However, the butt sleeve is altogether different. It's mostly ebony, but is made up of a geometric grid of rectangles outlined by thin veneers of holly. In addition, it has a longer than usual phenolic butt cap, reminiscent of a Tad, and somewhat typical of the time. It's a nice, clean design, and a classy cue.
|
|
When I bought this cue it was in need of a refinish. I had Andy Gilbert do the job, and when he did, he added a black, linen wrap and pressed it very tightly for a nice feel.
|
Richard used some subtle colors in the four part veneers - black, green, natural wood and probably holly on the inside. He also used a ringwork pattern that was also very typical for the time. The butt and the four shafts are all topped with matching maple joint protectors.
|
I don't know the story on the four shafts, and especially the one with the ebony points. I do know that it is one unusual cue. The three regular shafts are all right at 13mm, and the ebony pointed one is a little less. It weighs 19.4 oz.
|
Richard completed this cue with a flat-faced ivory joint with a 3/8 X 11 pin. For someone looking for an unusual cue by a Hall of Fame cuemaker, and a cue that will undoubtedly grow in value, this is a good choice. Price: Sold!!
|
|
